Update: 'I Agree With Nick' Summer Lightning clone.

I'm already kind of regretting the name of this brew, but don't want to change it really.  Anyway, politics aside, I put this into bottles and a mini-keg last week but forgot to blog about it.  Really, it was such a hassle I didn't want to write about it at the time, but feel like I should now.

I started off with 10litres in the fermenter, and the plan was to put half into the keg and half into bottles.  I've got a 10litre fermenting bucket with a tap on that I used as a bottling bucket of sorts.  I basically had a length of hose on the end of the tap to deliver the beer to the bottom of the bottle.  It kind of worked in theory as a crude bottling stick, but was a lot of hassle and I will therefor be getting a bottler before the next brew. By the time I had syphoned the brew into the bottling bucket, it was down to 8 litres on account of there being a whole pile of grossness at the bottom.  I guess this was mostly cold break material as this brew wasn't crash cooled.  Again, before the next brew, I need some way of cooling it quickly. Filling the keg went without incident but the bottles ended up being a pain and I only got 5 filled before I got too annoyed with holding the bottle and tipping the bucket etc.

Anyway, it's done now and I just have to wait about 4 weeks to tap the keg and see if it was all worth it.

In other news, the St Peter's Ruby Red is tasting pretty nice.

Update: Wherry

Today marked a week(ish) since I put the Wherry into the bottles and barrel and it has been in the Boiler Room to (hopefully) do its secondary fermentation for a week.  So today I moved it out to the shed for some cold conditioning.  Most kits say they are ready to drink after a week or two but this is a lie.  The minimum conditioning for kits is normally about 4 weeks but 6-8 are preferable.  I've read that this one definitely bnefits from a long conditioning and that's good because the Linthwaite is going down quite slowly (thanks to the faff of it being hugely carbonated).

Will obviously let you know how this is when I eventually try it.  The next kit brew I do will be a Brupak's Brewer's choice Old English Ale, which I'm looking forward to as its a little more involved to make the kit up...

First Bottles Labelled

So I managed to get some of Henry's labels printed off and have stuck them to the 4 bottles of Wherry I managed to get filled.  I made my own addition to the label so that I can actually tell what beer is in each bottle, hope you don't mind, Henners!

Bit of a Bottling Nightmare

So I finally got round to barrelling/bottling the Wherry today after school.  My plan was to do what I usually do to put the beer into a barrel then use the tap from the barrel with some tubing on the end to fill six bottles (I've decided I'm going to do this from now on with kits so I have some things to give to friends etc.).  A sound plan you might think?  Well, me too!

But NO!  Transferring into the barrel went fine, aided by a G clamp I bought today to hold the syphon tube in place.  However, my problems started when I realised the tubing I wanted to use didn't fit over the tap so I had to rethink my plan and ended up syphoning again out of the barrel into the bottles.  This was okay but I kept on over filling them and it was a bit hassle-ous.  The tragedy came when I tried to put the crown caps on the bottles.  Two of the bottles I had used wouldn't take the capper!  This means I've now wasted 2 pints (ish) of beer, which is pretty much a cardinal sin in my world...

That said, I now have a barrel and four bottles full of Wherry that ended up dropping to 1.010, which gives me a very rough ABV of 4.1%.  However, this is far from an accurate measurement (one calculator i found online gave me an ABV of 4.8%! Seems a little high...)

I shall post a picture once I've printed labels and stuck them on the bottles...